| Build Volume | 300 x 300 x 400 mm (11.8 x 11.8 x 15.7 in.) |
| Layer Resolution Low | 300 micron (0.011 in.) |
| Layer Resolution High | 50 - 100 micron (0.004 in.) |
| Marque | Creality |
| Type de Machine | 3D Printer |
| La technologie | Dépôt de filament en fusion (FDM) |
| Matériaux | PLA, ABS, Nylon, Bronze PLA, Bois, Résistance aux chocs, Extrêmement solide, Stabilité UV, Résistance thermique, Rubber (TPU), Chameleon PLA (Thermochromic), PETG, Carbon Fiber, PLA+, PEEK, PLA-CF, Nylon-CF, Marble PLA, PolySmooth™ (PVB), PETG-CF, Heat Treatable PLA (HTPLA), PLA/PHA, Amphora HT5300, Matte Fiber HTPLA, UV Color Сhanging PLA, TPU 95A, Color-Blending PLA |
| Site Internet | |
| Prix moyen | 920,00 $US |
Application:
Advantages：
Technology Patent,Certificates, Quality Guarranty
Most owners claim that it’s very easy to put the Creality CR-10 together. However, you should keep in mind that this machine still demands a certain amount of skill and knowledge. Some screws can be lost during shipping, so it’s better to check that they’ve all arrived before starting, and don’t forget to adjust the wheels on each axis. If you can spin the wheel and not move the axis, it needs a little adjustment. It’s also important to check the flatness of the glass and if it’s warped, you can either purchase a replacement glass or a mirror from IKEA."It’s not a push-button machine - you have to know what you’re doing and understand what symptoms you’re seeing in prints and how to correct them. But once you have experience, the machine is a joy to use", says Andrew Davie. He is the man behind the manufacturing service Doctor Boo's Astounding 3D Printing Press on Treatstock and moderator for the biggest Creality CR-10 group on Facebook.
Creality CR-10 works well with slicing softwares such as Cura, Simplify3D and Slic3r.
Can you put a dual extruder on a Creality CR-10?
It’s possible in theory, and you can even find instructions and a dual extruder design on thingiverse.com However, it’s quite hard to do it without a high level of technical skills and knowledge.
Does the Creality CR-10 have a heated bed?
Yes, Creality CR-10 has a heated print bed.
What size of filament does the Creality CR-10 use?
1.75 mm
The major differences are that the Creality CR-10S has Bootloader, an Extra Z Motor and filament sensor, whereas the CR-10 doesn’t. But in general, there's no difference in print quality between the two models. If you need a detailed comparison, here is a video review by Nexi Tech:
They look the same, and some of you may be wondering whether it’s just a re-branding or another version of the CR-10? Well, a Hictop representative claims that the “original” Creality CR-10 and the version sold by Hictop are the exact same products and that Hictop is just an authorized seller.
Useful links:
CR-10 Community reference page
